BDP-93 Problems FAQ

From OPPOwiki
Jump to: navigation, search
(added power on sequence entry)
(added test tone entry)
Line 21: Line 21:
 
== What is the preferred power on sequence (display, receiver, BD93) to minimize HDMI handshake duration and issues? ==
 
== What is the preferred power on sequence (display, receiver, BD93) to minimize HDMI handshake duration and issues? ==
 
<blockquote>In general, HDMI works best during power up if you turn things on in the reverse order of the HDMI chain -- that is, display first, then AVR, then source device (the player in this case). This is simply because HDMI is an end to end protocol driven by the source device, and so if everything down stream of it has had a chance to wake up, have some coffee, read the paper, and change the cat there are fewer things standing in the way.</blockquote>
 
<blockquote>In general, HDMI works best during power up if you turn things on in the reverse order of the HDMI chain -- that is, display first, then AVR, then source device (the player in this case). This is simply because HDMI is an end to end protocol driven by the source device, and so if everything down stream of it has had a chance to wake up, have some coffee, read the paper, and change the cat there are fewer things standing in the way.</blockquote>
 +
 +
== I cannot get the 93 to play the test tones when setting up the Audio. ==
 +
'''I've tried analog, coax and HDMI. Nothing makes a difference. The icon shows something is happening but I never hear it. Is it broken on this release?'''
 +
<blockquote>Test Tones ('''Audio Processing'''->'''Speaker Configuration''') is available through analog only. Also HDMI audio has to be OFF.</blockquote>

Revision as of 08:36, 22 December 2010

Personal tools