BDP-93 Component Output FAQ

From OPPOwiki
Jump to: navigation, search
(added initial component entry, it'll need some follow up later to clarify a couple of points in it.)
 
(added component processing entry)
 
Line 6: Line 6:
 
<blockquote>''(following needs to be confirmed)'' I believe 24hz is converted to 60hz over component if HDMI is not active.</blockquote>
 
<blockquote>''(following needs to be confirmed)'' I believe 24hz is converted to 60hz over component if HDMI is not active.</blockquote>
 
<blockquote>There is a Primary Output setting with options for HDMI1, HDMI2, and Analog. You are supposed to set this to match your main video output. ''(following needs to be determined)'' I'm not sure of the consequences for component when this is set to HDMI1 or 2; the image looks good to me.</blockquote>
 
<blockquote>There is a Primary Output setting with options for HDMI1, HDMI2, and Analog. You are supposed to set this to match your main video output. ''(following needs to be determined)'' I'm not sure of the consequences for component when this is set to HDMI1 or 2; the image looks good to me.</blockquote>
 +
 +
== Do the component outputs benefit from the QDEO processing? ==
 +
<blockquote>No, HDMI1 only has the QDEO processing.</blockquote>

Latest revision as of 19:41, 1 January 2011

Personal tools