BDP-93 Component Output FAQ

From OPPOwiki
Jump to: navigation, search

Questions frequently asked at AVSForum about the BDP-93.

Contents


I see this player has two HDMI outputs ,that are both active at the same time ,can the component output also be used at the same time, i.e. three monitors at the same time?

Yes, with some restrictions. 24hz is not a defined mode for component video, so you will get no image over component if one of the HDMI ports is using 24hz.
(following needs to be confirmed) I believe 24hz is converted to 60hz over component if HDMI is not active.
There is a Primary Output setting with options for HDMI1, HDMI2, and Analog. You are supposed to set this to match your main video output. (following needs to be determined) I'm not sure of the consequences for component when this is set to HDMI1 or 2; the image looks good to me.

Do the component outputs benefit from the QDEO processing?

No, HDMI1 only has the QDEO processing.
Personal tools